0 cart:$0.00

Do you remember first grade when the Circus came to town and you attended it as a field trip? There was always some excitement until the clowns came up into the audience and you freaked out. Well get your freak on kids, because here comes the Circus!Features: Weight: 4.29lb/1946g (20mm) Spring: ACT Air Spring Rate: Firm Bottom Out: Dual Bottom-Outs (1/Leg) Crown: Forged I - Beam Crown Crown Finish: Colour Matched Offset: 41.27mm Compression Damping: Absolute+ w/ Jump Stack Rebound Damping: Adjustable TPC Adjustments: Air, compression to lockout, Rebound Leg Diameter: 32mm Leg Material: 7050 Straight Wall Aluminum Brake: Post Mount Axle: 20mm Hex TA Crown to Axle: 458mm ACT AIR: Atmospherically Controlled Tuning- Utilizes air to set preload/sag for wide range of users. This user friendly system is maintenance free and forgiving, with simple user input charts on the rear. Features air pre-load adjustment. TPC (Twin Position Chamber): Providing 4-Dimensional Compression Damping; The velocity dependant circuit responds to the terrain while the Pressure Dependant Circuit flattens the bumps, the Energy Dependant Circuit activates on big hits while providing unmatched small bump sensitivity and the Position Dependant Circuit creates a bottomless feel. ABSOLUTE+: Velocity/Pressure Dependent System; Compatible with MILO remote lever, Absolute+ Switches between velocity dependent to pressure-dependent based on adjuster position. With an eight-position dial for compression rate-adjustment, it achieves lockout feel at maximum adjuster position, and plushness and control with pedalling efficiency. Please Buy Manitou Forks from my recommend store.


The new Dorado is an engineering masterpiece. 7050 legs, inverted construction, dual-chamber air spring, TPC damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou's patented HexLock 20mm thru-axle add up to the most advanced downhill fork ever.Features: Weight: 6.82lb/3096g Travel: 203 Internally Adj. Spring: Air Spring Rate: NA Bottom Out: Hydraulic and Rubber Bumper Steerer: 1 1/8" Aluminium Crown: Forged Hollow Bore Crown Finish: Matte Ano Polished Offset: 49.55 Compression Damping: TPC+ Rebound Damping: Adjustable TPC Adjustments: Air, Compression (High Speed and TPC), Rebound Leg Diameter: 36mm Leg Material: Aluminium Wheel Size: 26" Brake: Post Mount Axle: 20mm Hex TA Crown to Axle: 567/591 TPC (Twin Position Chamber): Providing 4-Dimensional Compression Damping; The velocity dependant circuit responds to the terrain while the Pressure Dependant Circuit flattens the bumps, the Energy Dependant Circuit activates on big hits while providing unmatched small bump sensitivity and the Position Dependant Circuit creates a bottomless feel. Dorado Air Spring: Featuring a single air input on top of the fork,and a large volume air spring for linear spring feel, it provides the ultimate sensitivity for any rider in any condition. Please Buy Manitou Forks from my recommend store.


PZ racing combines US design with popular European style. Our forks are thoroughly tested per EN standard in the factory and on the trails by professional riders.Features: Race CarbonBike type: Racing (700c)Steerer: 1-1/8in carbonCrown Race: 30mm, 45mm crown for int.Weight: 320g Please Buy PZ Racing Forks from my recommend store.


Q-LOC is a patented quick release system for thru axles. A simple push and twist of the nut enables a quick removal of the axle. The patented expander design passes smoothly through the thru axle and latches safely with a reassuring click sound.Safety and speed is crucial when it comes to pressurised wheel changes during a race.Features:Patented quick release system for thru-axlesCompatible with 15mm thru-axles Please Buy Suntour Fork Accessories from my recommend store.


Genuine Manitou replacement part. Features: Splice Compression Rod Assembly 2006 Please Buy Manitou Frames & Forks from my recommend store.


Genuine Manitou replacement outer leg for the Magnum Pro fork. Using the science of smooth all Manitou products are designed to conquer the toughest terrain. Please Buy Manitou Forks from my recommend store.


The 350 NCR forks from Marzocchi are ideal for Enduro use, for skilled riders, steep, aggressive slopes, large obstacles, and moderate jumps. Featuring the super efficient DBC and AER cartridge. Performance is an attitude.Features: Weight: 2250g/4.96lbsDamping: (L) - steel k=6.5 N/mm, (R) - RSpring: CoilSteerer: Tapered AluminumStanchions: 35mm Natural AnodizingBrake System: 6 post mountAxle: 15mm QRMaximum Rotor Size: 203mmTechnologies: DBC Hybrid Technology: The Dynamic Bleed Cartridge is the most efficient riding control solution, which takes all the advantages of the most popular damping systems on the market: open bath and sealed cartridge. Based on a hybrid system, the DBC cartridge is a low pressure system with a compensation reservoir controlled by a coil spring instead of an air pressurized chamber. The oil will flow through two different circuits that, in the case of extreme riding, will allow the fluid to rush out the cartridge when the system gets under high pressure. The oil will then be sucked by the cartridge inside again through a one way seal avoiding air to get mixed with the fluid, keeping the sliders always lubricated and each single damping tuning step effective and consistent in the roughest riding sessions. R: Rebound. Easy to set, real fun to ride, the R cartridge is the first step in to the high performing suspensions market. Controlling the low speed rebound ensures a constant riding control increasing the feel of confidence with the bike and the trail. Please BuyMarzocchi Forksfrom my recommend store.


Genuine Manitou replacement Decal Kit for Mattoc forks. Please Buy Manitou Forks Spares from my recommend store.


Top cap spring spacer for the Magnum fork.Features: Genuine Manitou replacement part Please Buy Manitou Forks from my recommend store.


Genuine Manitou Remote Assembly Kit Features: Designed to fit 2011 Manitou Forks with Milo capabilities Please Buy Manitou MILO Remote Assembly Kit 2012 from my recommend store.


The 320 LR is ideal for cross country use - riding along hilly trails with smaller obstacles. These forks must be used with XC tyres and disc, rim or linear pull brakes.You should only attach generators and racks, if any, to the designated mounting points provided on the forks. Featuring DBC hybrid technology, AER cartridge and LR damping. Performance is an attitude.Features: Weight: 1675g/3.69lbs Travel: 100mm - can be adjusted using spacers to 80mm - 120mm travelSeal: New custom single seal systemDamping: AER (L), LR (R)Spring: AirCrown: MatchingSteerer: Tapered AluminumStanchions: 32mm Natural AnodizingBrake System: 6 post mount Axle: 15mm QRMaximum Rotor Size: Max disc 185mmTechnologies: DBC Hybrid Technology: The Dynamic Bleed Cartridge is the most efficient riding control solution, which takes all the advantages of the most popular damping systems on the market: open bath and sealed cartridge. Based on a hybrid system, the DBC cartridge is a low pressure system with a compensation reservoir controlled by a coil spring instead of an air pressurized chamber. The oil will flow through two different circuits that, in the case of extreme riding, will allow the fluid to rush out the cartridge when the system gets under high pressure. The oil will then be sucked by the cartridge inside again through a one way seal avoiding air to get mixed with the fluid, keeping the sliders always lubricated and each single damping tuning step effective and consistent in the roughest riding sessions. AER: Air that makes you fly. The AER cartridge performs better than any other system on the market. Countless reviews and tests can proof that this is the way to go! The low pressure required keeps the seals sliding smoothly on the surface with no friction at all. The negative spring offers plushness you would expect from a coil system right from the beginning of the stroke. Furthermore, the fixed piston in the closed cartridge helps to reduce weight since less oil is needed in the entire system. LR: The perfect solution for all the riders that love to climb. Low speed rebound control combined with an efficient compression lock out is the best choice for cross country and all mountain enthusiasts. The new redesigned remote, compatible as an optional upgrade, gives even more speed to your control. Please BuyMarzocchi Forksfrom my recommend store.


Hot

Forks take a lot of abuse and we all know the importance of one that is well constructed. The new Invest fork features fully heat-treated chromoly tubing throughout with a 1pc.machined steerer tube with integrated bearing race for use with all 4545 headsets and a 6061 alloy compression bolt. The 6mm thick investment cast drop out and lower leg junction provide the ultimate strength while maintaining a clean look and the 26mm offset helps keep the front wheel under the rider for easier nose manuals. 34ozs. Features: Material: fully heat-treated chromoly tubing Top Cap: 6061 alloy Drop out: 6mm thick investment cast Offset: 26mm Weight: 34oz Please BuyFiend Forks from my recommend store.


Hot

Forming part of the Alex Hiam signature range, Colony's Sweet Tooth forks are fully heat-treated CrMo forks. The 165mm fluted steerer tube is fully CNC machined, with CNC detail in the fork crown. Designed for 18" wheels.Features:Full heat-treated CrMo forksFull CNC machined one-piece fluted steerer tube24mm top fork capBuilt-in bearing race 5mm thick drop outs with CNC detail CNC detail in fork crown7075 T6 Alloy Top Cap uses 3/8 socket wrench to adjust 3/8 axle slots25mm offset165mm steer tube length Please Buy Colony Frames & Forks from my recommend store.