A textbook allround wheel: Thanks to its low weight and the tubeless ready rims, the R 20 DICUT climbs very well and has a comfy ride. On the way down, the high end aluminium rims and the super stiff New Aero Nail Head spokes let the R 20 DICUT cut corners with precision.A perfect wheelset for all those who want both: the city sign sprint and climbing glory.Features: Weight [g]: 858 Tire type: Clincher tubeless ready Valve hole: Presta/SV 6.5mm Rim material: Aluminium Rim color: Black Hub axle system: 5/130mm QR Free wheel: Pawl System Free Wheel Body: Shimano 11 Road Disc Mount: N/A Spokes: DT new zero Nipples: DT Pro Lock Aluminium Lacing: 2 cross Included: 5mm RWS, Rim tapeTechnologiesDICUT: The RRC DICUT wheel line up is a perfect blend of aerodynamics, technology and design. Their aggressive optics push the rider on the climbs. DICUT hubs with their fine tuned flange geometry and straight pull spokes provide the stiffness needed. High modulus braking surfaces bonded with a heat resistant resin easily handle all out descents. Dedicated carbon layers improve heat dissipation from the braking surface into the whole rim. Finally, on the last miles to the finish line, the aerodynamically refined rim profile and eleven speed compatibility help to cut through the wind with just the right gear and minimal drag. New for 2013 are the RRC 46 DICUT H featuring a carbon-aluminium hybrid rim and the RR 21 DICUT, a lightweight allround aluminium wheel. Please Buy DT Swiss Wheels from my recommend store.
We pride ourselves in the quality of our Custom-Built wheels. Every wheel that is built in CRC is given the same care and attention whether it's entry level or top of the range. Your wheels will be built just as well as the ones we have on our own bikes and we make sure they get a seriously hard time.Features:DB 2mm-1.8mm Double Butted spoke 2mm at each end and 1.8mm at the middle. Lighter than the Plain Gauge but with similar strength.DB Revolution 2mm 1.5mm Double butted super light spoke. 1.5mm in the middle and should only be used on light weight XC racing wheels. Please BuyCampagnolo Wheelsetsfrom my recommend store, the Worlds Largest Online Bike Store.
The Discus C60 Team is the mid-range wheel in the deep-section Discus range. The 25mm carbon fibre rim is 58mm deep but the weight is kept to a minimum.Centre Lock disc-brake hubs with 24 bladed spokes offer industry-standard fitment for quality disc-brake setups, 3T linear+ system optimises build quality, while asymmetric rim drilling reduces difference in spoke tension between drive side and non-drive side. The hubs have a light alloy oversized spindle with modular end-caps that can be easily swapped from quick-release to thru-axle as needed.Features:Rim Size: ETRTO 622 x 18C, (700c), 25mm wide, 58mm deepRim Spec: Clincher, full carbon, offset double-angle drillingSpokes: 24 straight-pull, stainless-steel, black finish, double-butted aero, Pillar 1425Nipples: Light alloy, inverted, spherical washerHubs: Centre lock type, alloy body and spindle, alloy freewheel, adjustable bearings, black satin anodised Please Buy3T Wheels & Tyresfrom my recommend store, the Worlds Largest Online Bike Store.
The Discus C35 Ltd Rear Wheel is at the top of the 3T Discus range. It features a 25mm wide full carbon-fibre rim with 24 Sapim CX-Ray spokes and CeramicSpeed bearings. 3T linear+ system optimises build quality, while asymmetric rim drilling reduces difference in spoke tension between drive side and non-drive side. The hubs have a light alloy oversized spindle with modular end-caps that can be easily swapped from quick-release to thru-axle as needed.Features:Rim Size: ETRTO 622 x 18C, (700c), 25mm wide, 32mm deepRim Spec: Clincher, hi-modulus full carbon, offset double angle drillingSpokes: Sapim CX-Ray straight pull, stainless steel, black finish, double butted aeroNipples: Light alloy, inverted, spherical washerHubs: Centrelock type, oversize light alloy hub bodies, spindles and fw-body, adjustable CeramicSpeed bearings, black satin anodised Please Buy3T Wheels & Tyresfrom my recommend store, the Worlds Largest Online Bike Store.
The Discus C35 Pro Wheelset is the entry-level wheelset in the Discus range. It features a 25mm wide alloy rim with 24 spokes front and rear making them sure-footed, versatile and rugged. 3T linear+ system optimises build quality, while asymmetric rim drilling reduces difference in spoke tension between drive side and non-drive side. The hubs have a light alloy oversized spindle with modular end-caps that can be easily swapped from quick-release to thru-axle as needed.Features:Rim Size: ETRTO 622 x 19C, (700c), 25mm wide, 32mm deepRim Spec: Clincher, 6000 alloy, welded joint, offset double angle drilling, black satin anodisedSpokes: Round section, straight pull, stainless steel, black finish, double butted, Pillar, 24F/24RNipples: Light alloy, inverted, spherical washerHubs: Centre lock type, oversize light alloy hub bodies, spindles and fw-body, adjustable bearings, black satin anodisedWeight: 1810g Please Buy3T Wheels & Tyresfrom my recommend store, the Worlds Largest Online Bike Store.
The Iodine 3 from Crank Brothers are elite-level aluminium wheels for All Mountain riders. They feature a unique wheel design that is based around principles of strength, stiffness and acceleration. The unique wheel design distributes mass closer to the hub for faster acceleration and deceleration.The wheels are tubeless ready out of the box, as they feature no holes on the inner rim bed. They are incredibly strong thanks to their Twinpair spoke technology designed using the strongest shape in construction, the triangle, to maximise strength and stiffness.Features:Rim material: 6061-t6, smooth weld jointRim finish: Shot peen, black and silver anodisingRim width: 23mmRim depth: 19.5mmSpoke material: Sapim stainless steelSpoke butting: 2.0 / 1.8 / 2.0Spoke length: 166mmSpoke pins: Hollow 7075-t6 aluminiumNipple size: 3.2 x 139mmFront hub material: Iodine, 6061-t6Front hub bearing: Sealed cartridge 6805 (x2)Front hub end caps: 15mm (installed), 20mm (included)Rear hub material: Iodine, 6061-t6Rear hub bearings: Sealed cartridge 6903 (x2), 6902 (x2)Rear hub end caps: 12x142mm (installed), 10x135mm (included)Freehub: 3-pawl, 21T, AlloyXD driver: XD driver compatible, available separatelySkewers: Skewers not included, available separatelyE-bike Compatible: Urban/xc e-bikes up to 350 watts max Weight: 1850g per set Please Buy Crank Brothers Wheels & Tyres from my recommend store.
Recycled items have imperfections or suffered wear during the course of sale here at my recommend store. They include Ex-Display, Ex-Demo, Cosmetic Damage or Refurbished items that have been returned by customers, repaired by suppliers or have scratches or minor damage from transport or display.STATUS: EX-DISPLAY Wheel was fitted to display stand in our warehouse showroom Item is new, unused and in excellent condition Shows minor superficial scuff to red decal on drive side of wheel Shows very small scratch to hub axle from display fitting Damage is minimal, purely superficial & does not affect performance May show signs of handling & storage Fully inspected prior to sale *** Please note item includes Wheel bag, 10 speed washer, Brake pads & spoke tool. Does NOT include QR skewer or rim tape ***DT Swiss RRC 66 Di-Cut Tubular Rear Wheel The perfect tubular wheelset for triathlon racing and road time trialing. The 66mm depth is an optimal depth for maximizing a riders performance through Swiss technology and design. Not only will the DICUT hubs with Ratchet System help with rolling resistance, but the aerodynamic rims and spokes will push the rider to a PR in any time trialing situation. Features: DiCut: From the high tech, heat dissipating carbon rims right through to the asymmetric aluminium rims Made in Switzerland, DICUT wheels epitomize high end. Straight pull spokes and highly refinded hubs are state of the art wheel technologyTire type: Tubular Valve hole: Presta 6.5 mm Rim material: Carbon Hub axle system: 5/130mm QR Free Wheel: DT Swiss Ratchet System Free Wheel Body: Shimano 11 Road Disc Mount: - Spokes: DT aerolite, DT aero comp Nipples: DT Pro Lock aluminium Lacing: 2-cross Tire dimension: 700x19T - 700x22T Weight: 780g*** Please note item includes Wheel bag, 10 speed washer, Brake pads & spoke tool. Does NOT include QR skewer or rim tape ***
Take a short spin aboard the brand new EA70 SL wheelset and youll marvel at the ride quality. We developed an extra wide (17.5-millimeter internal rim width) welded alloy rim specifically for the EA70 SL.The wider shape changes the tires profile and greatly enhances the ride quality. Not to mention, an improved tire profile means a better contact patch for really leaning into corners!The EA70 SL rolls on our brand new V5 hubset and standard, J-bend spokes (20 front and 24 rear). This wheelset is built to withstand years of abuse. And if the EA70 SL ever needs service, you can rest easy knowing that every single component is easily replaceablefrom the standard sealed cartridge bearings to the standard J-bend spokes and nipples.Features: Weight: 840gFinish: Polished black, water transfer decalsType: aluminum clincherRim material: EA70 aluminum/weldedRim depth: 25mm Internal rim width: 17.5MMExternal rim width: 22MMSpokes: Sapim j-bend, black, double-buttedFront spoke pattern: 20 Total/277MM/RadialRear spoke pattern: 24 TOTAL /280MM, 1X (ND) AND 281MM, 2X (DS)Braking surface: Machined aluminumNipple type: internal alloyFront/rear hub: EASTON V5Bearing type: ceramic sealed cartridge bearing Please Buy Easton Wheels & Tyres from my recommend store.
These Easton Heist wheels have a 24mm internal rim width, which is in line with the current trend of increasing tyre volumes. With a competitive 1730g weight, the Heist 24 comes with durable three-cross laced 28 count double-butted black spokes, brass nipples, and a versatile six-bolt disc X5 hub that easily converts between various axle configurations with the included end caps. The Easton Heist 24 MTB Wheelset includes five spare single-length spokes for easier serviceability, and is tubeless ready straight out of the box with rim tapes and valves installed.Features: Rim Material:Welded Aluminium Rim Type:Tubeless ready clincher Rim Depth:20mm Rim Inner Width:24mm Rim Outer Width:28mm Valve:Presta Spokes:Double-butted, black Nipples:Brass, silver Lacing:Front: 3-cross; Rear: 3-cross Hubs:X5 Hub Spacing:Front: 9x100mm QR or 15x100mm; Rear: 10x135mm QR or 12x142mm Brake Type: 6-bolt disc Compatibility:10/11 speed Shimano freehub Weight: 1730g Please BuyEaston Wheels & Tyresfrom my recommend store.
After 2 years of design and testing, Hopes Enduro/Trail rims have landed & theyre available built onto Hopes legendary Pro 2 EVO Hubs!Features: Built with Pro 2 EVO hubs with standard spokes Wheels are machine built and hand finished in Barnoldswick Triple cavity construction offers excellent strength, yet keeps the weight low Tubeless compatible (requires tape and valves) Rim: Welded and eyeleted 6061 T6 aluminium rim. 23mm internal width. Triple cavity construction for added strength Spokes: Black Sapim Race stainless steel double butted spokes Nipples: Silver Brass nipples Axle: Rear wheels supplied as 135mm QR (135x12 and 142x 12 conversions available separately) Hub: 32 hole Pro 2 EVO hubs. 4 Pawl ratchet mechanism Bearings: Stainless Steel, sealed cartridge bearings Weights (approx): 26: 1020g 27.5: 1061g 29: 1093g Please BuyHope Wheelsfrom my recommend store, the Worlds Largest Online Bike Store.
After 2 years of design and testing, Hopes Enduro/Trail rims have landed & theyre available built onto Hopes legendary Pro 2 EVO Hubs!Features: Built with Pro 2 EVO hubs with standard spokes Wheels are machine built and hand finished in Barnoldswick Triple cavity construction offers excellent strength, yet keeps the weight low Tubeless compatible (requires tape and valves)How to purchase your Wheelset: Click Begin Building Step 1: Choose your Front Wheel Step 2: Choose your Rear Wheel Click Add Package to Basket Please BuyHope Wheelsfrom my recommend store, the Worlds Largest Online Bike Store.
The new and improved Kinesis CX wheelset is now even better value for money as it has been modernised to current standards and packed with contemporary features.These wheels are centrelock disc and Shimano 11-speed compatible straight out of the box. The rear hub can also be swapped for a SRAM XD driver if this is your preferred drivetrain choice. The hubs roll on large, high quality sealed Japanese bearings and the front wheel can run 12mm and 15mm thru-axles, as well as the traditional 9mm Quick Release. The rear wheel is also thru-axle compatible and can be setup to run on a 142 x 12mm axle or the standard 9mm Quick Release.Features:Rim Material: High Strength 6061 T-6 Heat Treated AlloyHub Material: Lightweight 7075 AlloyDisc Mount: CentrelockThru-Axle Compatible: YesSRAM XD Driver Compatible: YesSpoke Count: 28H11 Speed Ready: Yes (Shimano)Weight: Front 800g / Rear 960g Please BuyKinesis Wheels & Tyres from my recommend store.
The Racelight is a reliable, robust and fast wheelset built on the classic road wheel design with modern execution. Adequately suited to the most extreme riding conditions including cobbles, steep climbs and fast descents, these wheels are perfect for training and racing.They feature a wider, up to date rim profile, which is suitable for use with tubeless tyre sizes from 23mm to 32mm wide. The double sealed bearings combined with the triple butted spokes provide a gloriously smooth and compliant ride. Features:Rim Type:Tubeless Ready ClincherRim Width:22mmRim Depth:28mmMaterial:High Strength Alloy, T-6 Heat TreatedBrake Mount:Rim BrakeHubs:7075 AlloyFront Axle Compatibility:9mm QRRear Axle Compatibility: 9mm QRSpokes:Triple butted stainless steelFreehub:Shimano 11-speed (Campagnolo available)Weight:1520g Please BuyKinesis Wheels & Tyresfrom my recommend store.
Starting in California back in 1991, Kore gained a name for making solid reliable products and word quickly spread around the world. Since that time they have provided cutting edge products for riders at all levels and have been lucky enough to work with world-class athletes the world over.Features: 26 inch Dual Pinned AL6066-T6 Rivera Rims KORE Stainless Butted Spokes with Alloy Nipples Torsion Sealed Bearing ISO 6 Bolt Rear Disc Hub and Non Disc Front Alloy Sealed Bearing Cassette With 12T Sprocket Powder Coated With HRT Graphics KORE Chastity Belt Rim Tapes Included 110/20 Front And 135 Bolt Up Rear Color Way: White Rims, White Hubs, White Spokes, Red Nipples Weight: 26 F- 989g, R-1144g: Total 2133g Please Buy Kore Wheels from my recommend store.
The RP-28 Carbon Clincher Road Wheelset from Prime is the perfect wheelset for climbers and long distance riders alike; a shallow 28mm deep rim profile reduces rotational weight to help you climb faster and adds increased stability in crosswinds to provide predictable handling. Our 25mm wide rim profile is optimised for use with wider tyres ranging from 25c to 33c. For road use 25c to 30c tyres can easily be accommodated with our preference swaying towards 25c for all round use. The use of wider tyres offer many benefits; a wider contact patch for increased traction and cornering grip; reduced rolling resistance and added comfort associated with higher volume tyres.For gravel and Cyclocross use tyres ranging from 28c to 33c will easily be accommodated.The RP-28 features our CC-28 rims with R010 hubset and is hand built with Sapim CX-Ray spokes and Sapim Secure Lock aluminium nipples.For optimum braking performance we recommend you only use Prime Carbon Pro brake pads.Features: Prime carbon pro brake padsPrime Quick Release skewersTubeless valves x 2 (Installed) Tubeless tape (Installed) Spare spokes x 3: 1 front, 2 x Rear (1 drive side / 1 non drive side) Nipples x 3 Total Wheelset Weight: 1360g Rim Specifications: Material: T700 UD carbon fibre rim section High TG resin 3K carbon fibre brake track with textured surface for enhanced all weather performance Rim Profile: Prime U profile for enhanced aerodynamics and predictable handling in crosswinds Tubeless ready Spoke count: 24 hole / 20 hole front Rim width: 25mm wide (16.5mm internal rim width) SBT technology Staggered brake track positions the braking surface away from the tyre bead to increase heat dissipationHub Specifications:Rear: Material: Superlight Forged & CNC machined 7075 alloy hub body Spoke type: Straight Pull Bearings: Premium Japanese sealed cartridge bearings x 4 Axle: 130mm x QR Pawls: 4 Points of engagement: 26 Freehub Body: Light weight alloy with ABG (Anti Bite Guard), Shimano/SRAM 9/10/11 speed Freehub Body Option: Campagnolo freehub body available for purchase separately Hole count: 24 Weight: 219g Front: Material: Forged & CNC machined 7075 alloy hub body Spoke type: Straight Pull Bearings: Premium Japanese sealed cartridge bearings x 2 3 in 1 Axle: 100mm x 9mm Hole count: 20 Weight: 77g Please Buy Prime Wheels from my recommend store.
The ultimate in monocoque carbon wheels, the 5-spoke Rome produces incredible rigidity, perfect responsiveness and maximum aerodynamic performance.Made exclusively in Pro-Lite's own factories using cutting-edge thick-wall bladders and high vacuum forming machines, the carbon fibre is among the best in the industry, from the inner surface straight through to the outer. Pro-Lite Rome Carbon Track Rear Wheel Specifications: Material: High Modulus T700 Carbon Fibre. Rim Type: Tubular. Spokes: Advanced Aero Blade-Neutral LEDT. Axle: Track Axle kit and Road QR supplied (Front). Accessories: Carbon brake pads. Weight: 995g (Shimano). Pro-Lite Rome Carbon Track Rear Wheel Technologies: The Rome 5-Spoke carbon wheel is the ultimate in monocoque carbon wheels. Using the very latest 3D software and manufacturing techniques, we have ensured that the aerodynamics of this wheel cut through the air with minimum drag and maximum performance, both against rotational and forward air resistance. Pro-Lites flagship 5-spoke wheel uses a rounded leading edge design appropriate for typical bicycle racing speeds, with a gentle, flat taper towards the trailing edge. The spokes have a subtle parabolic curve and forward sweep along the platform to improve aerodynamics on rotation where airspeed is greater. The rim has also been designed with a similar shape, using the tyre as the leading edge against forward movement. Cutting edge high pressure forming techniques were developed specifically for this wheel (and subsequently adopted for the rest of our in-house carbon manufacturing line), yielding extremely hard, extremely rigid carbon fibre which maximizes power output without compromising weight. Virtually maintenance free and featuring exceptionally low rolling resistance angular contact bearings, riders can simply fit it and ride. Please BuyPro-Lite Rome Carbon Track Rear Wheel from my recommend store, the world's largest online bike store.
WH-9000 CL carbon clincher wheels, designed to meet pro road race criteria. The design concepts of the new generation Dura-Ace 9000 wheels created products specifically engineered with attributes that are required by specific racing disciplines.The BLADE concept development is Shimanos first fully committed effort to develop an aerodynamically superior wheel; the new rim profile is the result of countless hours in the wind tunnel and real world time trial and triathlete professionals feedback and validation. The accelerating SPEED concept is an evolution of one of Shimanos original Dura-Ace guiding principles of delivering the most efficient power transfer systems in the racing world, by constructing ultra-lightweight, stiff and durable rims.Features: Lightweight full carbon 35mm deep 20.8mm wide rim with alloy braking surface for improved aerodynamics and increased rigidity for sprinters and TT specialists Alloy clincher rim maintains high braking performance with standard brake pads in all conditions 21 rear and 16 front stainless steel butted and bladed straight pull spokes for optimal balance and rigidity (OPTBAL) Elbow-less spokes make for a strong yet compliant wheel High lateral rigidity is produced with a 3mm offset asymmetric rear rim and wide flange spacing Freehub uses quick pawl engagement every 10 degrees Labyrinth double-contact sealing effectively shuts out water and dirt Alloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces friction Quick and easy to maintain digital click bearing adjustment Cold forged, machined aluminium hub shell and oversized 7075 alloy axle combinedwith a titanium Freehub body keep the wheel weight to a minimum 700C clincher compatible Supplied with Q/R skewer Cassette Compatibility:10*/11 Over Locknut:F:100mm/R:130mm Axle Type:QR QR Skewer Length:F:133mm/R: 163/168mm Axle Length:108mm/141mm Contact Seal:Labyrinth and Contact Rim Type:Clincher Rim Size:700C Rim Height: 35mm Rim Width:20.8mm Spokes:16/21 Weight:1488g pair* Can be used for 10-speed with an additional spacer.A 2 year warranty is offered with all Shimano products from my recommend store (3 years on Dura-Ace and XTR products). Please BuyShimano Wheelsfrom my recommend store.
High performance road racing wheel meets the demands of today's professional and amateur riders.Features:Carbon and alloy clincher rim is both light weight and rigid whilst maintaining high braking performance with standard brake pads20 rear and 16 front stainless steel butted and bladed straight pull spokesHigh lateral rigidity is improved with a wide flange spacingLabyrinth double contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothnesQuick and easy to maintain digital click bearing adjustmentPolished bearing races reduce friction and provide for smooth rotationCold forged and machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum8, 9, 10 and 11-speed compatible700C clincher compatibleSupplied with Q/R skewerWeight: 1502 grams a pairA 2 year warranty is offered with all Shimano products from my recommend store (3 years on Dura-Ace and XTR products). Please BuyShimano Wheelsfrom my recommend store, the Worlds Largest Online Bike Store.
High performance road racing wheel meets the demands of today's professional and amateur riders.Features:Carbon and alloy clincher rim is both light weight and rigid whilst maintaining high braking performance with standard brake pads35mm deep 20.8mm wide carbon rim with alloy braking surface for improved aerodynamics and increased rigidity for sprinters and TT specialists16 front stainless steel butted and bladed straight pull spokesHigh lateral rigidity is improved with awide flange spacingLabyrinth double contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothnessPolished bearing races reduce friction and provide for smooth rotationCold forged and machined aluminium hub shell keep the wheel weight to a minimum700C clincher compatibleSupplied with Q/R skewerWeight: 709 gramsA 2 year warranty is offered with all Shimano products from my recommend store (3 years on Dura-Ace and XTR products). Please BuyShimano Wheelsfrom my recommend store, the Worlds Largest Online Bike Store.
The Shimano RX010 Disc Road Wheelset are a pair of high performance wheels that meet the demands of today's professional and amateur riders. Featuring angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength in real world riding conditions. Features:24 mm high profile aluminium rim for improved aero dynamicsEasy to use Centre-Lock rotor mount for use with disc brakes28 stainless steel bladed straight pull spokes with a 2-cross lacing pattern improve lateral and torsional (power transmission) rigidityLabyrinth and contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothness9, 10 and 11-speed compatible700C Clincher rim onlyRecommended tyre width 25-38CSupplied with Q/R skewer Please BuyShimano Wheels & Tyresfrom my recommend store.
High performance MTB wheel meets the demands of today's professional and amateur riders. Keeping previous XT wheel's rigidity blanced with a lighter weight. Increased mud and water resistant design.Features: XT trail disc wheel system with 15mm thru axle brings high performance technology to an affordable price point These trail wheels are lightweight, strong and durable with a 21C (25.8mm width) UST Tubeless and tubed tyre compatible rim for use with 1.95 - 2.5 inch tyres 24 butted 2.0-1.8-2.0mm stainless steel spokes The hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenance Easy to use Centre-Lock Disc rotor mount for secure hassle free setup Performance and durability is ensured by using a 15mm thru-axle design Double contact seals with internal grease sleeve to keep the elements out and the grease in 100mm O.L.D Size: 559 x 21C (26 inch) Spokes: Straight(2.0-1.8-2.0)/Round Rim Height: 20.5 Rim Width: 25.8 Rim Type: UST Brake Type: Disc Rotor Mount: Center Lock Overlock Nut: 100mm Axle: 15mm thru axle Recommended Tyre: 1.95-2.50A 2 year warranty is offered with all Shimano products from my recommend store (3 years on Dura-Ace and XTR products). Please BuyShimano Wheelsfrom my recommend store.
The Stolen Rampage Rear Wheel features a sealed hub with 4 sealed cartridge bearings and a 14mm CrMo axle offering a smooth ride with excellent durability. This is hand laced to a Rampage double-wall alloy rim to produce an incredibly strong and lightweight wheel.Features: Hub: Sealed cartridge bearings with 14mm CrMo axle Driver: 9t CrMo driver with 3-pawl system Rim: 36h double-wall alloy Spokes: Black with black brass nipples Includes Stolen PVC rim strip Weight: 1466g Please BuyStolen Wheels & Tyresfrom my recommend store.
In the Midwestern United States, Fat Biketraffic rivals automobile traffic. Lets faceit, the wheels on these rigs are purposebuilt. Purposeful pigs of a wheel size.Steadfast, durable, ramble over anythingwheels! So they named the new 80mm wheel after the most bad ass pig on theplanet. The Mulefut. Wide enough to handle a sizable tyrepatch, with strategiccut-outsto reduce overall weight. The STR tubeless system creates tubeless seals that burp less, leaving you with more air inyour tyre. Shorter Sidewalls trap air better when runningtubeless. When tubes are used, the lower sidewall of STR rim will eliminate many of the pinch flats that occurwhen the tyre is driven into the top of the rim. Also, the combination of lower air pressure and better tyre stability allows riders to go faster with bettercontrol.Ramble on!Features: Rim: STR (SUNringl Tubeless Ready) Hubs: Cartridge, bearing, J-Bend all new SRC 150 Spokes: Wheelsmith Double Butted Outer Rim Width: 80mm Inner Rim Width: 74.4mm Size: 26in (559) Brake Compatibility: Disc only Hole Count: 32 (Dual Row) ERD: 551mm Hole Offset: 19mm Weight: 1300g Additional: Bead humps retain the tyre bead to the rim Please BuySun Ringle Wheels & Tyresfrom my recommend store.
New 24mm Carbon Tubular rim New extra light P. R.A. hubs for DP spokes 6 sealed cartridge bearings (2 F+4R) mounted on a 17mm hub axle diameter Aero blade spokes Artisanal built, entirely by hand Includes special carbon QR (QR-89), brake pads and wheel bags Weight: 1,280 grams / pair (w/o QR)Sizes: Aluminum freehub body for Shimano 10-11sp or Campagnolo 10-11sp Spokes (F/R): 20 radial front wheel; 24 rear wheel, 16 cross X 3 drive side and 8 radial non drive side (2:1 ratio) Minimum tire requirement of 23mmFinish Rims: 3K Carbon finish Front & Rear hubs: Black anodized Spokes: Black Please BuyStans No Tubes ZTR Flow EX MTB Rimfrom my recommend store, the Worlds Largest Online Bike Store.
The Vision Trimax Carbon 35 offers a lightweight combination of integrated carbon and alloy rim. With a wind cutting 35mm depth, and a bump softening width of 17mm, this wheelset is a true winner.Add in the fully adjustable P.R.A. hub and aero bladed spokes to these hand built wheels and you are in for a smooth ride no matter if you are on the flats or in the hills, or anywhere in between.Features: CSI Carbon Alloy clincher rim - 35mm height CNC braking surface Extra light P.R.A. hubs for DP spokes 6 sealed cartridge bearings (2 F+4 R) mounted on a 17mm hub axle diameter Aero bladed spokes ABS self locking nipples Artisanal built, entirely by hand Includes: Alloy QR-91 and wheels protection Rims: 3K Carbon finish Front & Rear hubs: Anodized Freehub: aluminium freehub body for Shimano 10-11sp or Campagnolo 10-11sp Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 2x drive side and 7 radial non drive side (2:1 ratio) Minimum tyres requirement: 23mm Weight: 1600 grams / pair (w/o QR) Please BuyVision Wheels & Tyresfrom my recommend store.
The Aerorage track front wheel is manufactured using the outstanding Halo 120mm rear width track hubs and precision built together using 32 reliable plain 14gauge spokes. This combined with the Halo Aerorage Mid size Aero road rim makes it light and strong with an attractive mid size 25mm Aero section.Features: CNC machined finish brake surface Weight: Black - 971g, white - 992g Width: 25mm Axle Thread: 9x1 Spokes: 32 x plain 14 gauge spokes Note: General Fixed cog check: for correct fixed use, the fixed cog should NEVER move on the hub when pedal force is applied in both directions. i.e. if the cog moves, then something is wrong. Continued use with a fixed cog that moves will result in damage to the hub. Please BuyHalo Wheelsfrom my recommend store.
The new Racing 7 LG wheelset, although it could be classed as entry level it is certainly race ready. Using many of the same features on higher priced wheels, the Racing 7 LG's are a bargain.These wheels carry the same technology as wheels higher up in the Fulcrum range. This includes the asymmetric rim, which creates a better spoke tension balance. A machined braking surface for better performance in all weather conditions, high quality bearings and steel spokes with a 2mm cross section for exceptional stiffness. Features:Tyre Type: ClincherTyre Width: 25mm to 32mmMaterial: AluminiumRim Height: 24.5mm Front, 27.5mm RearRim Width: 23mm, ETRTO 17cBraking Surface: AluminiumAxle Compatibility: Quick ReleaseFront Spokes: 18Rear Spokes: 20 (10 Left, 10 Right)Spokes Material: Stainless SteelSpokes Profile: Rounded, J-PullNipples: AluminiumFront Hub: AluminiumRear Hub: Aluminium with an oversized flangeWeight: 1763g Please Buy Fulcrum Wheels from my recommend store.
This EC90 Aero 55 clincher wheelset offers exceptional performance & aerodynamic efficiency thanks to their Fantom rim technology. Couple this with the 55mm deep section rim & outstanding braking performance, you have a wheelset that delivers results.These EC90 Aero 55 wheels have everything anyone could ever ask for: leading aerodynamics, certified road tubeless compatibility without rim strips, unrivaled braking performance, outstanding durability and competitive weight.The Fantom rims steal the spotlight. These rims are wide (19mm internal rim width), 55mm deep and the round nose keeps them stable in cross winds. You will not find a faster clincher in this category and the wind tunnel testing proves it. Not to mention this is the one and only carbon clincher wheelset with certified road tubeless compatibility. But dont let the rims outshine the hubs.At the heart of the Aero 55 youll find Eastons all new Echo rear hub. Its a masterpiece of durability and efficiency. Right away youll notice the purr of the alloy drive mechanism and the 7-degree engagement. However, the best benefit to the new Echo hubset is durability.Every aspect of the new Easton Echo hubset was designed to improve bearing life, increase stiffness and cut weight. Easton hit the reset button and rethought every component: from the bearing architecture to the machining methods, spoke engagements, drive ring engagements, the angular contact bearings, the sealing methods, greasethe resulting hubset offers market-leading durability and power transfer.Features:Shimano/SRAM hub onlyFantom rim technologyFast carbon clincher wheelset55mm deep section for maximum aero efficiencyTubeless compatibleSpecification:Wheelset weight: 1690gFinish: Matt carbon with water transfer decalsType: Carbon clincherRim material: CarbonRim depth: 55mmInternal rim width: 19mmExternal rim width: 28mmSpokes: Sapim CX-Ray, straight-pull and bladedFront spoke count: 16, radialRear spoke count: 20Braking surface: CarbonCassette type: Shimano/SRAM 11 speedFront/Rear hub: Easton Echo Please BuyEaston Wheels from my recommend store, the Worlds Largest Online Bike Store.
The modern wheelset for racing. Light, wide and tubeless ready. The XR 1501 SPLINEfeels right at home on world cup XC courses and your favorite local XC loop. Spline One Technology: Each year, riders are going bigger and getting faster. Whether its winning on the world cup circuit or setting their personal best on their favorite local loop, demanding riders seek out products that give them an edge. No matter how you ride, DT Swiss SPLINE ONE wheels have been designed to help you reach the next level Straightpull Technology: The term Straightpull refers to spokes with no bend at the head. This design allows for an ideal strength to weight ratio when compared to conventional spokes. Due to their more precise alignment and direct trajectory, straight-pull spoke technology creates a stiffer, more responsive wheelFeatures: Tire type: Clincher tubeless ready Valve hole: Presta 6.5mm Rim material: Aluminium Hub axle system: 15/100mm TA Free wheel: - Free Wheel Body: - Disc Mount: IS (6-Bolt) Spokes: DT competition straightpull Nipples: DT Pro Lockaluminium Lacing: 3-cross Tire dimension: 1.7 inch - 2.4 inch Included: RWS, 5mm endcaps/axle, Tubeless Valve Weight: 680g (27.5") - 710g (29") Please BuyDT Swiss Wheelsfrom my recommend store, the Worlds Largest Online Bike Store.
Comfort joins speed. The new R 23 SPLINE wheels work perfectly with the new breed of wider road tires.The combination of wide rims and wide tires results in more comfort in the saddle and more grip on the road. The rider ends up with faster and more enjoyable rides. Together with the laterally stiff build which uses high end bladed spokes, the R 23 SPLINE lets you tackle the last climb of the day with enough energy to enjoy the looks of the hubs and to plan your next big ride.Features: Material: Rims: alloy Hubs: aluminium Spokes: stainless steel Nipples: aluminium Weight: Front approx. 700 gram) Rim width: 23mm/18mm Spokes: DT aerolite Spokes: Front 20 (radial) Over locknut distance: Front 100mm Fitting: clincher, tubeless compatible Fitting dimension: 700x19C - 700x25C Purpose: training, touring Hub: Spline, DT Swiss Two pawl system Fitting for shifting: Shimano, SRAM 9/10/11-speed Color: black Included in delivery: incl. Road quick releasesTechnologiesSpline: With straight pull spokes and use specific lacing, superlight hubs as well as high end rims featuring key DT Swiss technology, SPLINE wheels make for a perfect training and racing partner. Please Buy DT Swiss Wheels from my recommend store.
Set up, drift, push the roller and take off: All mountain at its best. The wide carbon rim, 32 bladed spokes and super light hubs of the EXC 1550 combine pure speed with great looks. The DT Swiss EXC 1550 mountain bike wheel is a super light enduro carbon 26" wheel with hand made, multiple chamber UD carbon rims. Although the EXC 1550 MTB wheels are incredibly light, they are also exceptionally strong and stiff to handle Enduro riding. DT Swiss have kept the grams off this wheel by using carbon rims and have left off the purely-cosmetic layer of carbon weave which is usually applied. Features: Super light enduro carbon wheel Hand made, multiple chamber 29mm UD carbon rims A fully integrated component package built by the world leaders in wheel technology - ride confident in the knowledge there is no better wheelset available 32 hole 240s 6-bolt disc hubs, white Alpine 3 triple butted spokes and Hexlock alloy nipples arranged into a perfectly balanced spoke lacing pattern, add up to a super light wheel package Shimano 9-speed compatible Hugi system aluminium Freehub body Supplied with 100 x 15mm thru bolt front hub 15mm thru bolt rear axle will fit standard drop-outs Supplied with a high quality wheel bag, rim tape Uses standard DT spares and spokes which are replaceable by any cycle shop with wheel building experience - no return to the manufacturer required Weight for front 10mm wheel: 825g Please Buy DT Swiss Wheels from my recommend store.
The Cobalt 3 from Crank Brothers are lefty specific elite-level aluminium wheels for XC trail riders. They feature a unique wheel design that is based around principles of strength, stiffness and acceleration. The unique wheel design distributes mass closer to the hub for faster acceleration and deceleration.The wheels are tubeless ready out of the box, as they feature no holes on the inner rim bed. They are incredibly strong thanks to their Twinpair spoke technology designed using the strongest shape in construction, the triangle, to maximise strength and stiffness.Features:Rim material: 6061-t6, smooth weld jointRim finish: Shot peen, black anodisingRim width: 21mmRim depth: 19.5mmSpoke material: Sapim stainless steelSpoke butting: 2.0 / 1.6 / 2.0Spoke length: 166mmSpoke pins: Hollow 7075-t6 aluminiumNipple size: 3.2 x 139mmFront hub material: Cobalt, 6061-t6Front hub bearing: Sealed cartridge 6805 (x1), 6902 (x1)Front hub end caps: 15mm (installed), 9mm (included)Rear hub material: Cobalt, 6061-t6Rear hub bearings: Sealed cartridge 6903 (x2), 6902 (x2)Rear hub end caps: 12x142mm (installed), 10x135mm (included)Freehub: 3-pawl, 21T, AlloyXD driver: XD driver compatible, available separatelySkewers: Skewers not included, available separatelyE-bike Compatible: Urban/xc e-bikes up to 350 watts max Weight: 1640g per set Please Buy Crank Brothers Wheels & Tyres from my recommend store.